Soft brush 0.12 mm
This brush is used for gently buffing hard floors and softly scrubbing natural floors such as terrazzo and marble, linoleum, wood and profiled rubber.
Soft brushes can be used after the floor has been cleaned to remove any remaining dullness from the floor and give it a soft sheen finish.
|
Standard brush 0.20 mm
This brush is used for all general cleaning, and for all types of floor surfaces. This brush can also be used on the rear of the Rotowash machine, in conjunction with a hard or abrasive brush, as it picks up the water and dries more effectively.
When dry and clean, the standard brushes can be used to take the dullness off a clean floor, by providing it with a soft sheen finish.
|
Hard brush 0.50 mm
As its name suggests, this is a stiff bristle brush for use on hard surfaces such as concrete, terracotta and stone in outdoor areas, along drives and around swimming pools etc.
It can also be used on quarry or ceramic tiles, slip resistant vinyl safety flooring and industrial carpet such as Flotex. The stiff bristles are ideal for scrubbing, but less effective at picking up the dirty residue.
Therefore, it is recommended that a standard or soft brush be used on the rear of the machine. This is an excellent combination for scrubbing and drying tiled floors, and providing an outstanding finish.
|
Abrasive brush 0.60 mm
This is the stiffest bristle available for scrubbing outdoors or on concrete and resin safety floors that require a heavy, deep scrub. It is used to agitate the dirt that has been compacted and ingrained onto the floor's surface.
A standard brush can be used on the rear when additional dirty water pick up is required.
|
Rotowash brushes with Colour coded end caps
The flexibility of the Rotowash equipment allows many customers to use one machine in varying areas within a building.
Rotowash offers a range of brushes with colour coded end caps which enable customers to allocate a brush set to each area and help combat cross contamination.
|
Rotocart
When transporting the Rotowash machines over uneven surfaces, or when longer distances between jobs are involved, Rotowash recommends the Rotocart.
The Rotcart clips to the side of the Rotowash and makes transportation between locations simple and convenient.
|
